Uma cylinder 177 Racing YZF R 125 V1-V2 - MT 125 V1
(0 review)

This UMA Racing cylinder has a 62mm bore offering a displacement close to 180cc and must be fitted with a racing cylinder head with 23/20 valve. It will fit perfectly on your Minarelli LC 125 high engine (YZF R 125 2008-2018 and MT 125 2014-2019). The UMA Racing kit benefits from a ceramic treatment and a forged piston to offer better resistance and power. With an adequate motor and electronic configuration it is possible to approach 25 HP! It is delivered complete with piston, segments, clips, axle, gasket set and assembly instructions. Warning: Product reserved for competition use only.

Technical advice: To replace your cylinder, you will need to provide for the dismantling of your cylinder head. After disassembly, it is necessary to tighten and loosen the cylinder head twice in order to benefit from a good crushing of the cylinder head gasket. The tightening torque for the screws and studs is: - 22Nm for the 4 studs, - 10Nm for the 2 screws on the water pump side.

For motorcycles with high mileage it is necessary to check the condition of your water pump. We recommend adding a Racing oil pump and fitting a new timing chain. This cylinder requires a Manual FST 2.0 timing chain tensioner, your original timing tensioner is not compatible. We also recommend that you replace the injector / throttle body and your ECU in order to fine-tune your adjustment if necessary.

This product is no longer available.

Terms and conditions*
Pay in mini-4fois-paypal with a Paypal account
Satisfied or your money back for 30 days 
DHL Express delivery ⛟ | Product return

Manufacturer Model Start Year End Year